NBS RNAO 20x32x12 needle roller bearings

Housing Material:304 Stainless Steel; Bearing Part Number:6204; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Width T(mm):19; Seals:ZZ (Double Shield); Type:Bearings with Housin; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Bal

Dynamic load, C:20.7 kN; Da max:60 mm; Fatigue limit load, Cu:0.53 kN; B:17 mm; d:32 mm; rs min:1 mm; Brand:NTN; Characteristic outer ring frequency, BPF0:3.15 Hz; Max operating temperature, Tmax:110 °C; Mass:0.23 kg;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):81900; Diameter series symbol:For Heavy Load; Stroke:No; d:60; Machining:No;

Machining:No; Diameter series symbol:Medium Load; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):17800; Stroke:No; Seal:Nitrile; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):29100; Bearing Inner Dia. Shape:Cylindrical Bore Se

H:238 mm; A1:16 mm; B1:49.3 mm; N:18mm; s1:39 mm; A2:67.3 mm; C:52.5 kN; Recommended tightening torque for set screw:16.8 Nm; d:57.15 mm; G:R1/8";

B1:109.5 mm; Designation of bearing:EX317-52G2; A2:111.5 mm; A:74 mm; G:M10x1; Weight:15.38 kg; C0:96.5 kN; e:44 mm; Recommended tightening torque for set screw:54.5 Nm; Designation of housing:FL317-;

Designation of housing:FE209N-; T max.:200 °C; B:30.2 mm; J:105 mm; Designation of bearing:ES209G2T20; L:137 mm; A2:56.7 mm; Dz:95 mm; C:31.85 kN; A:40 mm;

Characteristic outer ring frequency, BPF0:3.91 Hz; ra max:2 mm; B:29 mm; D:120 mm; Mass (without HJ ring):1.65 kg; d1:71.6 mm; Characteristic cage frequency, FTF:0.39 Hz; Fatigue limit load, Cu:12.4 kN; D1:94.6 mm; E:100.5 mm;

H2:94 mm; L:167 mm; T max.:200 °C; s1:36.3 mm; Designation of housing:P207-; A1:31 mm; S:18.8 mm; C:25.7 kN; L1:54 mm; Weight:1.81 kg;

S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H:112 mm; T min.:-20 °C; e:19 mm; A1:10 mm; C0:6.65 kN; Designation of bearing:UC203G2; Dz:54 mm; A:30.3 mm;

N:19mm; A2:68.7 mm; G:M6x1; d:60.32 mm; B:65.1 mm; C0:32.8 kN; Z:42.8 mm; S:25.4 mm; Designation of bearing:UC212-38G2T04; A:48 mm;

Heat Resistant Characteristics:Standard; Basic Dynamic Load Rating Cr(N):96000; Surface Treatment:No; d:75; Unit, Type:Bearing unit; Unit, Type:Bearing unit; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Rolling Element Material:

d:30 mm; Da:46.8 mm; Oil Holes:1.5 mm; Radius:0.6 mm; B:10 mm; Static Load Rating:9.2 kN; da:35 mm; D:55 mm; Dynamic Load Rating:8.2 kN;

E:22 mm; L1:35 mm; Weight:1.48 kg; A1:27 mm; J:68 mm; d:34.92 mm; L:100 mm; T max.:100 °C; H:47.6 mm; B:42.9 mm;

N:M16; C:52.5 kN; A1:40 mm; C0:32.8 kN; A:70 mm; s1:53.2 mm; Designation of bearing:EX212G2T20; B1:77.7 mm; Designation of housing:PG212-; S:30.9 mm;